Camouflage Omer Pneumatic Speargun Airbalete With Reel | Camouflage Omer Pneumatic Speargun Airbalete With Reel

Beschreibung

Camouflage Pneumatic speargun Omer Airbalete with reel

A Revolutionary pneumatic speargun that combines the best traits of power in air guns to the manoeuvrability and aim advantages of band guns.
Stock configuration: The gun is equipped stock with a 6.75 mm (17/64”) diameter spring stainless 17-4 ph spear-shaft with a patented flopper system and a pump.
The reel “ONE” 3D is equipped only in the AIRbalete Camu 3D (with 50 meters capability -approx 164 feet- in the 70, 80 and 90 version and with 80 meters capability (approx 260 feet) in the 100 and 110 versions).

Barrel/piston chamber
The barrel of the gun is produced using Hydroforming technology which allowed us to manipulate the shape to achieve the best maneuverability for an air gun.
The internal piston barrel diameter is 11mm which consents easier loading at higher pressure compared to most standard 13mm air guns. In addition thinner faster shaft diameters between 6-7 mm are employed.

Mechanism
The trigger mechanism is designed to offer a sensitive trigger independent of the amount of air pressure preloaded in the barrel. It therefore remains neutral and unaffected offering unaltered trigger sensitivity regardless of the power. This was the result of a push rod lever design that exponentially reduces the load between the trigger and the trigger mechanism. The tooth used to engage the shaft, known as the trigger sear, is produced with a special stainless steel that has a very high resistance to wear and tear and is treated with a special coating that reduces friction. Another innovation in the field of air-guns is the side pivoting line release that keeps the shooting line tucked to the side of the gun.

Muzzle
The new muzzle integrates a power reducer which can be easily employed while fishing. The side water ports in the front of the gun (larger than standard ports to increase the water escape from the piston chamber) can be shut by simply turning the muzzle cover.
By doing this the speed of the shaft is reduced by 15%.

Handle
An innovative handle design resembles those of modern band guns. As with band guns, the handle alignment positions the hand directly in line with the spear shaft contained in the inner chamber, opposed to below the barrel as with all the current pneumatic speargun models. This realization allows a more natural aim and better absorption of recoil similar to the characteristics of modern band guns. The handle can be easily removed thanks to a generous sized stainless steel locking pin that fixes it to the rest of the gun. Once removed there is access to the dump valve of the gun which is otherwise sealed dry during regular use. In addition, the handle grip itself can be substituted for an ergonomic grip available in RIGHT or LEFTIE versions.

One reel Camu 3D
The new ONE reels offer innovative design and thoroughly tested solutions providing highly efficient tools on a professional level.
The low profile shape and the un-cumbersome design make for a low key compromise without compromising the balance of the overall gun.
Its vertical position, the spool with a specific push brake lever make potential “bird nests” practically impossible.
A high surface area drag makes it easy to completely lock the drag just as easily as opening the drag lever to the right amount of pressure for a fish on the run during battle. The stainless steel crank arm is long and built high strength which provides exceptional leverage even against tough game fish. Its low-profile design conceals nicely in the drum of the reel while fishing.

Slide ring microspeed
The slide-ring is a fundamental particular in the hydrodynamics of the shot along with the penetration properties of the spear-shaft.
The new Microspeed metal slide ring is fruit of long studies geared toward reducing hydrodynamic friction as well as maintaining the highest shot precision. Created with a method known as Microfusion or “lost wax technique” in 304 stainless its reduced dimension and two wings are used for slotting the shooting line at a 30 degree entry. This innovative solution avoids the concern of having to keep the correct shooting line angle while fighting a fish because it places the entire load on the slide ring itself rather than the holes of the slide ring. This prevents any stress to the shooting line. Also thanks to the shape of the slide ring, the stop washer as well as the spring typically employed in pneumatic speargun shafts, have been replaced reducing the profile considerably.